Electronics News

News

ICP Electronics Australia Announces ICP DAS’s I-2534 Industrial 4-port CAN bus Switch and I-5534-M Robust 4-port Industrial CAN bus Switch in Metal Casing with Firmware and Utility Upgrade

February 4, 2016 / Staff Writer

ICP Electronics Australia Announces ICP DAS’s I-2534 Industrial 4-port CAN bus Switch and I-5534-M Robust 4-port Industrial CAN bus Switch in Metal Casing with Firmware and Utility Upgrade

Latest News

ICP Electronics Australia Announces ICP DAS’s I-2534 Industrial 4-port CAN bus Switch and I-5534-M Robust 4-port Industrial CAN bus Switch in Metal Casing with Firmware and Utility Upgrade

The I-2534 and I-5534-M are both CAN switches used to establish a connection among four CAN bus sub-networks.

In order to solve the problem of the star topology within the CAN network, the I-2534 and I-5534-M are specially designed for integrating four CAN networks and solving the problems when using star topology. They are not only used as a CAN bridge, but also have more powerful features.

  1. Extend CAN bus working distance.
  2. Connect to four CAN sub-networks with different baud rate.
  3. Support Star or Tree topology.
  4. I-5534-M provides higher stability and reliability especially in harsh environment.

The upgraded firmware keeps the original features like the user-defined CAN baud rate, CAN bus message acceptance filter and routing path configuration.

In addition, the upgraded firmware features the CAN-ID mapping mechanism to modify the received CAN-ID before process forwarding. Users could configure the CAN-ID mapping table.

When the I-2534 and I-5534-M receives the specific CAN-ID, the CAN-ID will change to the corresponding CAN-ID by the mapping table before it is transmitted to another CAN ports.

When CAN devices transmit the same CAN messages, the I-2534 or I-5534-M could change to another CAN-ID by the CAN-ID mapping mechanism.

Key Features:

  • 4x CAN Communication Ports.
  • TJA1042 CAN Transceiver
  • Compatible with CAN Specification 2.0A and 2.0B.
  • Fully Compatible with the ISO 11898-2 standard.
  • Baud Rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined.
  • CAN Filter is Configurable.
  • CAN Bus Route Path is Configurable.
  • 100 Data Frames Buffer for each CAN Channel.
  • Max. Data Flow up to 2500fps (frames per second) for all CAN Channels.
  • Selectable Baud Rate by Rotary Switch.
  • Selectable 120Ω terminator Resistor by DIP Switch.
  • LED for CAN Status.
  • 2500 Vrms Isolation on the CAN Side
  • 3 kV Galvanic Isolation between the Power Supply and CAN Channel
  • 4 kV ESD Protection for each Channel
  • Hi-Pot, Surge, EMI and EFT Testing all Pass.
  • The Metal Casing of I-5534-M provides higher protection on EMS or other electromagnetic noises.
  • Utility tool for CAN Filter, Route path, User-Defined Baud Rate and CAN-ID Mapping (v1.10 Firmware) Configuration.
  • Max. CAN-ID Mapping Data up to 32 for each CAN Channel. (v1.10 Firmware)